破碎機,制砂機,圓錐破碎機

　　產品概述/Productoverview

　　超細微粉磨是在積累了多年磨粉機生產經驗的基礎上，吸納了國際先進的機械制造技術，并經過多年的試驗與改進而開發的一種新型超細粉(325-2500目)加工設備。主要只用于對中、低硬度，莫氏硬度≤6級的非易燃易爆的脆性物料的超細粉加工，細粉成品粒度在325-3000目之間任意調節，產量可達0.4-4.5噸每小時。

　　Superfine powder mill is a new type of superfine powder (325-2500mesh) processing equipment, which is developedon the basis of many years of experience in the production of grinding machine, absorbing the international advancedmachinery manufacturing technology, and through many years of experiment and improvement. It is mainly used forprocessing non inflammable and explosive bittle materials with medium and low hardness and Mohs hardness s 6. Theparticle size of fine powder can be adjusted between 325-3000 mesh, and the output can reach 0.4-4.5tons per hour.

　　工作原理/working principle

　　主機電動機通過減速器帶動主軸及轉盤旋轉，轉盤邊緣的輥銷帶動幾十個磨輥這磨環滾道內滾動。大塊物料經錘式破碎機破碎成小顆粒后提升機送入儲料倉，再經過震動給料機和傾斜的進料管，將物料均勻地送到轉盤上部的散料盤上。物料這離心力的作用下散向圓周邊，并落入磨環的滾道內被環輥沖擊、滾輾、研磨，經過三層環道的加工變成粉體，高壓風機通過抽吸作用將外部空氣吸入機內，并將粉碎后的物料帶入選粉機內。選粉機內旋轉的葉輪使粗物料回落重磨，符合要求的細粉則隨氣流進入旋風集粉器并由其下部的卸料閥排出即為成品，而帶有少量粉塵的氣流則經過脈沖除塵器后通過風機和消聲器排出。

　　The main motor drives the spindle and the turntable to rotate through the reducer, and the roller pin at the edge of theturntable drives dozens of grinding rollers to roll in the grinding ring raceway. After large pieces of material are broken intosmall particles by hammer crusher, the elevator is sent to the storage bin, and then the material is evenly sent to the bulk trayon the upper part of the rotary table through vibrating feeder and inclined feeding pipe. Under the action of centrifugal force,the material disperses to the periphery of the circle and falls into the raceway of the grinding ring. It is impacted, rolled andground by the ring roller. After the processing of the three-layer raceway, it becomes powder. The high-pressure fan sucksthe external air into the machine through the suction action, and brings the crushed material into the powder separator. Therotating impeller in the separator makes the coarse material fall back for regrinding. The fine powder that meets therequirements enters the cyclone collector with the air flow and is discharged by the discharge valve at the lower part of thecyclone collector. The air flow with a small amount of dust is discharged through the fan and muffler after passing through thepulse dust collector.

　　產品優勢和特點/Product advantages and features

　　1、比傳統磨粉機械更加高效，節能;

　　2、磨輥、磨環采用特殊材料，易損件使用壽命長;3、使用脈沖除塵器、消聲器，具有環保、清潔。

　　1. It is more efficient and energy-saving than traditional grinding machinery;

　　2. The grinding roller and ring are made of special materials, and the wearing parts have long service life;

　　3. The use of pulse dust remover, muffler, with environmental protection, clean.

　　產品參數/Product parameters