破碎機,制砂機,圓錐破碎機

　　產品概述/Productoverview

　　歐版粗粉磨用于生產0-3mm粗粉的新一代磨機。改機沿襲了破碎機的部分工作原理，彌補了傳統磨粉機成品粒度大小區間的不足，成為生產粗粉顆粒的核心設備。廣泛應用于冶金、礦山、化工、水泥、煤矸石、建筑、制砂、耐火材料、玻璃及陶瓷等工礦企業中，從事物料細碎作業。適宜破碎石灰石、方解石、白云石、重晶石、滑石、碳酸鈣、石膏、膨潤土等。

　　European roughing mill is a new generation of mill used to produce 0-3mm roughing powder.Itfollows part of the working principle of the crusher, makes up for the shortage of the size range of thefinished product of the traditional mill, and becomes the core equipment for the production of coarsepowder particles. Widely used in metallurgy, mining, chemical industry, cement, coal gangue, construction,sand making, refractory, glass and ceramics and other industrial and mining enterprises, engaged inmaterial crushing operation. Suitable for crushing limestone, calcite, dolomite, barite, talc, calciumcarbonate, gypsum, bentonite, etc.

　　工作原理/working principle

　　主機通過電機、三角皮帶帶動主軸，從而使轉子旋轉，大塊物料從進料口進入破碎腔之后，被高速運動的板錘擊碎。破碎至符合粒度要求的物料由底部蓖條直接排出，不符合粒度要求的物料則這破碎腔內，被轉子上的板錘和襯板反復破碎，直至符合粒度要求后排出。為避免堵塞，被粉碎物料的含水量一般不超過20%。

　　The main machine drives the main shaft through the motor and V-belt to make the rotor rotate. Afterthe large material enters the crushing chamber from the feeding port,itis broken by the high-speed platehammer. The materials that meet the grain size requirements are directly discharged from the bottomcastor bar, and the materials that do not meet the grain size requirements are repeatedly broken by theplate hammer and liner on the rotor in the crushing chamber until they meet the grain size requirements.Inorder to avoid clogging, the moisture content of crushed materials is generally not more than 20%。

　　產品優勢和特點/Product advantages and features

　　1、生產能力強，破碎比大;

　　2、電耗低、產品;粒度均勻;

　　3、機械結構簡單，緊湊輕便;

　　4、投資費用少、管理方便等優點。

　　1. Strong production capacity and high crushing ratio;2. Low power consumption and high quality products;The particle size is uniform;

　　3. The mechanical structure is simple, compact and light;

　　4.It has the advantages of less investment cost and convenient management.

　　產品參數/Product parameters